How to use MMS in a bath

Chlorine Dioxide can be absorb by the skin and delivered directly into underlying muscle. According to Jim Humble, using Chlorine Dioxide orally provides the Chlorine Dioxide (Cl02) primarily to the red blood cells, however Chlorine Dioxide absorbed by the skin deliver the Cl02, directly to the liquid plasma of the blood.

Chlorine Dioxide Bath

Soaking for 20 minutes in water laced with Chlorine Dioxide Could help:

• A detox process
• Deal with many conditions effecting the skin
• In cases where one finds it difficult to go beyond a 7 activated drops of oral dose, bathing in Chlorine Dioxide could be used to increase the supply of Cl02 gas to the blood stream.

While bathing with Chlorine Dioxide , pathogens present on or just below the skin surface can be destroyed and exit the body through the skin floating away, rather than being processed through the blood stream, finally eliminated by the liver and kidneys. In other words Bathing with Chlorine Dioxide may help avoid overwhelming the internal elimination systems.

When using the Chlorine Dioxide bath protocol your full skin surface will be in contact with Cl02 gas for 20 minutes.

Jim Humble advice, is to keep on taking oral doses during your occasional tub experiences.

Warning – Please remember that different people may react differently. The fact that many people have used Chlorine Dioxide bath safely, does not guaranty you will have the same experience. I tried a diluted mixture on a small area of the skin first, to satisfy myself I had no adverse reaction.

How to prepare Chlorine Dioxide bath

• Clean the bath well before you prepare an Chlorine Dioxide bath, otherwise the Chlorine Dioxide will work on clearing soap scum, reducing or neutralising the Cl02 available to your body.
• Fill the bath with hot water, don’t use soap or any other substances in the water.
• While you wait for your bath to fill up, prepare the Chlorine Dioxide solution:
• Put 20 Sodium Chlorite 28% drops in a clean dry glass
• Add 20 drops of Hydrochloric Acid (HCL) 4-5%. (or 20 drops of citric acid 50% solution.
• Add the Chlorine Dioxide solution you prepared into the water of your bath and stir it
• Get in the bath and relax for 20 minutes

Note – When preparing  Chlorine Dioxide solution for use in a bath, you can use double the amount of the activating acid. This will accelerate the release of the Cl02 gas over a shorter time – around  20 minutes.

While bathing keep the water hot. You can rub the water on lips, ears and hair and massage the scalp. Adding more water does not weaken the CL02 that is being generated. Bathing in hot water opens the skin’s pores, allowing the Chlorine Dioxide to penetrates deeper under the skin.

What if water splashes into your eyes?

When Chlorine Dioxide solution is diluted to such an extent, it is unlikely to cause any reaction. If for whatever reason it makes you uncomfortable, rinse with water or wipe it off.

If you have open skin sores or severe body wounds, begin with less concentrated Chlorine Dioxide solution to avoid sensations of heat or burning. Open sores usually heal quickly due to the disinfecting action of Chlorine Dioxide.

By the 3rd bath, you may see skin moles begin to crumble.

Conditions affecting the skin

Please leave this field empty

Good things come to those who sign up

Check your inbox or spam folder to confirm your subscription.